Dynex DX-PS06CC Quick Setup Manual

Package contents

• Cross cut shredder with wastebasket
• Quick Setup Guide
Read Avoid touching Product is
WARNING
instructions the document not intended
To avoid injury to
before use. feed opening for use by
yourself and
with your children
others, please
hands. (product is
follow safety
Never insert not a toy).
instructions
your hand or
before operating
fingers into the
this device.
feed opening.

Features

Ready Overheat
On/Auto Off Rev
Before using your new product, please read these instructions to prevent any damage.
Do not spray Avoid loose Insert one Do not shred Avoid getting
or keep any clothing or credit paper with your hair or face
aerosol jewelry card into paperclips or near the
products in touching the the credit staples. Do document feed
or around document card slot. not shred opening. Do not
shredder. feed gummed or let hair touch the
opening. wet paper. document feed
opening. Serious
injury may result.

Setting up your shredder

1 Place the shredder head securely on the rim of the supplied wastebasket.
Caution: Your shredder has very sharp, exposed blades on the underside. Use care
when mounting the shredder to the wastebasket.
6 Note: Do not use bags to line the wastebasket.
2 Connect the power cord to a power outlet.
Note: Always make sure that the two labels are aligned
Do not
exceed the
when you place the shredder head onto the basket. This
shredder's
shredder has a safety interlock which
maximum
prevents it from operating unless the
capacity of
six sheets.
shredder head is placed on the basket
correctly.
# Item
1 Switch
2 Ready LED indicator
3 Overheat LED
indicator
4 Document feed
opening
5 Shredder head
6 Window
7 Wastebasket
Quick Setup Guide
Cross Cut Shredder | DX-PS06CC
the underside. Use care
Back of shredder
Description
On/Auto ( | ) - Shreds an item when inserted
into the document feed opening, then stops
when it is finished shredding.
Off () - Turns off the shredder.
Rev ( ) - Reverses the paper to clear a jam or
remove unshredded paper.
Lights green when the power is on.
Lights red when the shredder is overheated.
Put paper (maximum of six sheets) or a single
credit card into this opening to shred.
Contains the control panel and the cutting
head.
Allows you to see when the wastebasket is full.
Empty when 2/3 full.