NETGEAR Zing Mobile Hotspot User Manual page 51

Item Description
Status
Status of connection to mobile broadband network (Connected /
disconnected).
Network Network type (GSM, 3G, LTE).
Status
Signal
The signal strength listed as a number of bars (a higher number means a
Strength stronger signal).
The following values appear if the Network status is LTE.
RSRP The signal strength of the network (Reference Signal Received Power).
RSRQ The signal quality of the network (Reference Signal Received Quality).
RS-SINR
Signal to Interference Noise Ratio based on Reference Signals (narrowband
and wideband).
PLMID The LTE cell that is currently serving the hotspot.
Band
The LTE Band being used for the connection.
TX power The transmitter power. A higher number is better.
RX Power The receiver power. A higher number is better.
The following values appear if the Network status is CDMA / 3G.
HRPD RSSI Signal strength of the network.
HRPD EcIo
Dimensionless ratio of the average power of a channel, typically the pilot
channel, to the total signal power.
CDMA RSSI Signal strength of the network.
CDMA EcIo
Dimensionless ratio of the average power of a channel, typically the pilot
channel, to the total signal power.
Channel DRC (Digital Rate control) channel number.
PRev PRL (Preferred Roaming List) version. To update the PRL, see
Preferences
The following values appear if the Network status is GSM.
RSSI Power level in the received radio signal (Received Signal Strength Indication)
EcIo Quality of the pilot channel as a ration of the received power to overall noise.
RSCP
Received Signal Code Power.
LCD Touchscreen Interface
Tab.
43
Network >