NETGEAR Zing Mobile Hotspot User Manual page 98

Device
Model
Zing Manager
PRL Version
Power State
Current
temperature
Current voltage
Battery charge
level
Battery status
Battery
temperature
WWAN Info
Activation Date
Refurbished Date
IP Address
User NAI
LTE APN NI
Lifetime LTE
Transferred
Lifetime 3G
Transferred
Lifetime GSM
Transferred
Zing Manager (Browser) Interface
The manufacturer's name for your device.
Version number of the Zing Manager web app.
Preferred Roaming List version number.
The hotspot's power state (Online, Offline).
The hotspot's temperature. If your device is too warm, make sure the
area is well-ventilated and air can circulate around your device to cool it.
(See Environmental
The amount of power the hotspot is currently using.
The amount of charge remaining in the battery. (See
Battery.)
The current operating condition of the battery (Charging, No Battery,
Normal, Low, Critical).
The battery's temperature. If the battery is getting too warm, turn your
device off and do not connect to the charger.
The date that the hotspot was activated on the Sprint network.
The date that your device was refurbished (if applicable).
The IP address of the WWAN radio.
The CDMA username for data access.
The LTE data realm.
The total amount of data sent and received while connected to LTE
networks.
The total amount of data sent and received while connected to 3G
networks.
The total amount of data sent and received while roaming on 2G
networks.
Specifications.)
90
Charging the