Toshiba Strata DK User Manual page 23

Step 3: Connect and Apply Power to Base Unit
To use as a stand-alone telephone
Connect the modular jack labeled "Line In" to
the telephone wall jack.
To use with a desk telephone
1. Unplug the telephone line cord from your desk
telephone.
2. Connect this cord to "Line In" of your
cordless telephone.
3. Using the two foot modular cord that came
with your cordless telephone, connect the jack
labeled "Line Out" to the desk telephone.
Step 3: Connect and Apply Power to Base Unit
The AC adapter furnished with this telephone may be equipped with a polarized line
Note
plug (a plug having one blade wider than the other). This plug fits into the power
outlet only one way. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still does not fit, contact your facilities coordinator
about replacing the obsolete plug. Do not alter the shape of the blades on the polarized
plug.
1. Plug the AC adapter cord into the AC adapter input jack on the base unit.
AC Adapter
18
–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Line In to Digital Telephone Circuit
(DK14 KSU or DK40 Base KSU, KCDU,
Modular
PDKU2, RDSU)
Cords
Line Out
See I&M Manual, Chapter 8—DK40/DK424
to DKT
Universal Slot PCB Wiring
Wide
AC Adapter
Blade
1174
Strata DK Cordless Digital Telephone 5/99