Using Line Buttons - Toshiba Strata DK User Manual

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Using Line Buttons

This feature enables a station user to connect two lines, then drop out of the conversation. Both
buttons (or
connection to be established from your telephone.
To connect two outside lines using the Line button
1. Press
line call.
2. Press another
button and dial a
telephone number.
3. Press
party answers.
...or return to the original
call if you receive a busy
tone/no answer by
pressing the original
4. Press
5. Press
Features
while on a
after the
button.
.
.
buttons) must appear on your telephone to allow tandem
After you press the button, you hear dial tone, the Line
LED flashes at the conference rate. The new Line LED
lights steady.
The Line LEDs light steady and all parties are
conferenced.
You hear dial tone.
The Line LEDs flashes at the exclusive hold rate and
the LED lights steady.
Both Line LEDs continue to flash at the exclusive
hold rate and the two lines are connected. The LED
turns off.
If the public telephone company provides auto disconnect,
the connection may release automatically when the parties
hang up. If not, the lines must be supervised to be
disconnected (See the previous "Supervision"
instructions).
Two (Tandem) Line Connection
83