Table of Contents
Advertisement
Chapter 3
3.1
C onfiguration of Utility
1 4 B
TL-WN727N Wireless USB Adapter can be configured by its utility for Windows XP/ Vista/ 7. This
section will take the configuration in Windows XP for example and guide you to configure your
wireless adapter for wireless connectivity with trustable data security encryption features.
The configuration steps in Windows XP/ Vista/ 7 are similar. For the configurations in Windows
Vista/ 7, please refer to the instructions in Windows XP.
After the Adapter's driver and utility has been installed, the adapter's tray icon,
appear in your system tray. It means the utility is running on your system. If the utility does not run,
you can run the utility by clicking: Start> All programs> TP-LINK> TP-LINK Wireless Client
Utility. If the icon still does not appear, the driver or utility may be installed incorrectly or the
adapter is unplugged, please try again.
Icon
means the connection has been established.
Icon
means there is no connection.
Right-click the
icon and choose Launch Config Utility, the configuration screen of the utility
will appear as shown in the figure below.
The utility provides complete and easy manage tools to:
Display current status information
Edit and add configured profiles
Display current diagnostics information
Note:
If your OS is Windows XP, you can use Windows XP to configure the wireless network settings.
(To use this function, you must upgrade the OS with sp2). Just right-click the icon
bottom of the screen, and click Use Zero Configuration as Configuration utility to switch the
utility.
TL-WN727N
C onfiguration
3 B
Figure 3-1 Configuration Screen
Wireless N USB Adapter User Guide
- 9 -
or
, will
at the
Advertisement
Table of Contents
