Table of Contents
Advertisement
establish a successful connection with your AP.
4.2
A dvanced
1 7 B
Click the Advanced icon, the following screen will appear. Here you can make some advanced
settings and click Apply to make these settings take effect.
Beacon Interval(ms)- Enter a value between 20-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
TX Power - Manually force the AP's transmitting power. System default is 100%.
Idle Time - Manually force the Idle Time using a selected value. The default is 300.
4.3
A ccess Control List
1 8 B
Click the Access Control List icon of the utility and the Access Control List screen will appear
as
F igure 4-9
. In this page, you can enable/disable the AP to connect with the specified Mac
X
X
address. Click Allow All, and enter the Mac address allowed to connect to your AP in the empty
field beside MAC Address, then click
existing Mac address in the list and click
When clicking
, you will clear all the Mac addresses in the Access Control List as
TL-WN727N
Wireless N USB Adapter User Guide
Figure 4-7
Figure 4-8
to add it to the list, shown in
to remove it from the list as shown in
- 29 -
F igure 4-10
. Highlight an
X
X
F igure 4-11
X
F igure 4-12
X
.
X
.
X
Advertisement
Table of Contents
