To Connect Using Wps; Pbc (Push Button Configuration) Method - TP-Link TL-WN721N User Manual

6. To view more information about the network currently connected, click Status in the tools
section and the page will display information such as the network type, link quality and
wireless mode.
3.2

To connect using WPS

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
If the wireless router supports WPS/QSS, you can establish a wireless connection between the
Adapter and router using either Push Button Configuration (PBC) method or PIN method.

3.2.1 PBC (Push Button Configuration) method

1. Press the WPS/RESET button for 2~3 seconds on the back panel of the router. Here we
use router TL-WR841ND as an example.
2. Press the WPS button on the adapter. There are two ways:
Method One：

TL-WN721N/TL-WN722N
Figure 3-8
Wireless N USB Adapter User Guide
13