Table of Contents
Advertisement
Wireless Mode - Specifies 2.4 GHz 150 Mbps, 2.4 GHz 54 Mbps or 2.4 GHz 11 Mbps
operation in an access point network. The Wireless adapter must match the wireless mode of
the access point with which it associates.
Enable TX Burst - It can translate more data when it is enabled.
Enable TCP Window Size - It can enhance the TCP throughput when it is enabled.
Fast Roaming at - Roaming will disable when Transmit Power is below some dBm if the
function is selected.
Apply - Click the Apply button to save the current setting.
3.1.5
A bout
3 0 B
Click the About icon on the Utility screen
wireless card and driver version information.
Version - The version of the following items.
Utility Date - The creation date of this utility.
Driver Date - The creation date of the wireless network adapter driver.
SDK Date – The creation date of the SDK.
Firmware Version -The version of the adapter firmware.
EEPROM Version - The version of this EEPROM.
MAC Address - The MAC address of the wireless network adapter.
Note:
For more help information, you can go to website of our company.
3.1.6
A n example for application
3 1 B
Suppose you are using an AP, the SSID is TPLINK and it adopts 64-bit encryption with the key
0123456789. To establish a connection with this AP, please follow these steps below:
1.
Launch TP-LINK Wireless Client Utility.
TL-WN727N
Wireless N USB Adapter User Guide
and you will see the following screen displaying the
Figure 3-31 About
- 24 -
http://www.tp-link.com
H
.
H
Advertisement
Table of Contents
