Chapter 4 Ap Mode; Config Ap - TP-Link TL-WN727N User Manual

Chapter 4
Click the icon to switch to AP Mode. In this mode you can use the TL-WN727N as a soft AP.
Note:
At this time, if your PC have Installed other network card (wireless or wire), you will be prompted
"ICS Select WAN Adapter" to select one of them to be "WAN". With this function TL-WN727N can
serve as wireless router based on the selected card connecting to the Internet, which will make
the APs of the LAN share the Internet.
The configuration utility screen will then appear as shown in the figure below. By clicking the
corresponding icon, you can configure the AP, make some advanced settings and view the AP's
status. The tools section shown in the following figure respectively stands for Config AP
Advanced , Access Control List
right .
4.1 C onfig AP
1 6 B
Click the Config AP icon to load the following screen and set the AP as you need.
TL-WN727N
A P Mode
4 B
, Associate List
Wireless N USB Adapter User Guide
Figure 4-1
Figure 4-2
and About
Figure 4-3
- 27 -
,
from the left to the