TP-Link TL-WN727N User Manual page 19

Tx Power - Manually force the AP's transmitting power.
Use RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If you are
not sure, please leave it default here.
Use Fragment Threshold - This value is the maximum size determining whether packets will
be fragmented. Setting the Fragment Threshold too low may result in poor network
performance because of excessive packages. You are recommended to leave it default if you
are not sure about it.
6. Click the Active icon
screen looks like below, it shows that you have successfully added a new profile and
connected to the wireless network.
3.1.2.2. D elete a profile
3 3 B
Highlight the desired profile name on Profile List and click the Delete icon
removed from the list.
3.1.2.3. E dit a profile
3 4 B
Highlight the desired profile name on Profile List, and click the Edit icon
TL-WN727N
in the screen below to connect to the chosen network. When the
Figure 3-9 Profile Added Successfully
Figure 3-10 Delete a Profile
- 14 -
Wireless N USB Adapter User Guide
. The profile will be
, the Profile