Renkus-Heinz STXLA User Manual page 13

Locate the Array
In most venues your choice of location will be extremely limited.
Optimize the Array
Your goal is to make the frequency response curve as flat as possible while delivering the desired SPL. Use the
boxes at the left of the screen to add or remove modules and to set the splay angles. AimWare shows you
instantly whether you are getting closer to an optimum design or farther away. For most venues, the entire design
process will take less than one hour.
Save Your Configuration
The final step is to save the design as a file for later recall or modification. You can also import the file into EASE
4.1 or EASE JR 4.1 for further evaluation in EASE.
13
Line Array User's Manual