Traeger Elite BBQ 07E Owner's Manual
  1. Manuals
  2. Brands
  3. Traeger Manuals
  4. Grill
  5. Elite BBQ 07E
  6. Owner's manual

Traeger Elite BBQ 07E Owner's Manual

Residential pellet grill
Hide thumbs Also See for Elite BBQ 07E:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

See also: Owner's Manual
TRAEGER
®
OWNER'S MANUAL
BBQ 07E
"Elite"
RESIDENTIAL PELLET GRILL
This Grill Protected Under Patent Number: 4,823,684
FOR OUTDOOR USE ONLY!
WARNING!
DO NOT STORE OR USE NEAR GASOLINE OR OTHER
FLAMMABLE OR COMBUSTIBLE LIQUIDS IN THE
VICINITY OF THIS APPLIANCE! USE ONLY TRAEGER
BRAND HARDWOOD BBQ PELLETS IN THE
OPERATION OF THIS UNIT.

Advertisement

Table of Contents
loading

Related Manuals for Traeger Elite BBQ 07E

Summary of Contents for Traeger Elite BBQ 07E

  • Page 1 This Grill Protected Under Patent Number: 4,823,684 FOR OUTDOOR USE ONLY! WARNING! DO NOT STORE OR USE NEAR GASOLINE OR OTHER FLAMMABLE OR COMBUSTIBLE LIQUIDS IN THE VICINITY OF THIS APPLIANCE! USE ONLY TRAEGER BRAND HARDWOOD BBQ PELLETS IN THE OPERATION OF THIS UNIT.
  • Page 2 INTRODUCTION Congratulations on your purchase of this TRAEGER WOOD PELLET GRILL, Model 07E Lil’ Tex “Elite”. With proper set-up, operation and maintenance, this grill will provide you with years of cooking enjoyment. Your new grill comes almost completely assembled. You will need to complete...

  • Page 3: Section One: Assembly Instructions

    SECTION ONE: ASSEMBLY INSTRUCTIONS MOUNTING THE PELLET HOPPER/FIREPOT: 1) Slide the side box (23) square tube into the square opening located on the left side of the main barbecue body (2).Gently push the firepot into the body until the pellet hopper is snug against the main barbecue body (2). 2) Align the bolt holes (21) on the side box with the bolt holes on the barbecue body (2).
  • Page 4 Installing The Viper Casters: Use a second person to help lift up the Receptacle barbecue body. Install casters as shown in the diagram. Caster Pin POSITIONING THE U-SHAPED FIREPOT COVER AND ANGLED DRIP PAN: Short End of Long End of Angled Drip Pan Angled Drip Pan Angled Drip Pan...

  • Page 5: Section Two: Empty Pellet Hopper Lighting Instructions

    5 minutes for the pellets to travel from the hopper to the firepot. When the pellets begin to fall into the firepot, Turn the power switch off. WARNING! USE ONLY TRAEGER OR SMITH & WESSON BRAND BBQ PELLETS, which are specifically made to work in our grills.

  • Page 6: Section Three: Standard Lighting Procedure (For Normal Use)

    SECTION FOUR: OPERATING TIPS 1) Your Traeger Pellet Grill should never be moved while it is hot. If you are transporting your grill in a vehicle after cooking on it, make sure the fire is completely out and the unit is completely cold before placing it in any vehicle.

  • Page 7: Section Five: Maintaining Your New Grill

    7) Grease fires are caused by not properly maintaining your grill, or failing to clean your angled drip pan on a consistent basis. In the unlikely event you experience a grease fire while cooking, keep the lid closed. Never open the cooking chamber lid during a grease fire.

  • Page 8: Section Six: If Your Fire Goes Out

    Part names are given in the front of this manual on the COMPONENT DIAGRAM PAGE. To order parts: Find the part name on the component diagram page. Call or write your Authorized Traeger dealer, distributor or Traeger Industries. Give us your name, phone number, address, model and serial number of your unit.

Table of Contents