Specifications - Alpine iDA-X305S Owner's Manual

Specifications

FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
MW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
LW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
USB SECTION
USB requirements
Max. Power Consumption
File System
MP3 Decoding
WMA Decoding
AAC Decoding
Number of Channels
Frequency Response*
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
* Frequency response may differ depending on the encoder
software/bit rate.
GENERAL
Power Requirement
Maximum Power Output
Maximum Pre-Output Voltage
Weight
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
DETACHABLE FRONT PANEL SIZE
Width
Height
Depth
• Due to continuous product improvement, specifications and design
are subject to change without notice.
36
-EN
87.5-108.0 MHz
0.7 µV
80 dB
65 dB
35 dB
2.0 dB
531-1,602 kHz
25.1 µV/28 dB
153-281 kHz
31.6 µV/30 dB
USB 1.1/2.0
500mA
FAT 12/16/32
MPEG-1/2 AUDIO Layer-3
Windows Media™ Audio
(WMDRM10 is supported)
AAC-LC format ".m4a" file
2-Channel (Stereo)
5-20,000 Hz (±1 dB)
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
14.4 V DC
(11-16 V allowable)
50 W × 4
2 V/10 k ohms
1.0 kg (2 lbs. 3 oz)
178 mm (7")
50 mm (2")
156 mm (6-1/8")
170 mm (6-3/4")
46 mm (1-13/16")
28 mm (1-1/8")
108 mm (4-1/4")
46 mm (1-13/16")
30 mm (1-3/16")
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• iPod is a trademark of Apple Inc., registered in the U.S. and
other countries.
iPhone is a trademark of Apple Inc., registered in the U.S. and
other countries.
• "Made for iPod" means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by
the developer to meet Apple performance standards.
• "Works with iPhone" means that an electronic accessory has
been designed to connect specifically to iPhone and has been
certified by the developer to meet Apple performance standards.
• Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
• Audyssey MultEQ XT is a registered trademark of Audyssey
Laboratories Inc.
®
• The BLUETOOTH word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by Alpine Electronics, Inc. is under license.
• "MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson."
• "Supply of this product only conveys a license for private, non-
commercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenue-
generation) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www.mp3licensing.com"
• "Uni-Type™" is a style of Universal design font developed by a
joint research between LIM Corporation Ltd., and Chiba
University Faculty of Engineering.
• "Uni-Type™" is the trademark registered by LIM Corporation
Ltd.