Setting Pty31 (Emergency Broadcast) Reception; Setting The Time To Automatically Adjust; Receiving Traffic Information; Pty (Programme Type) Tuning - Alpine iDA-X305S Owner's Manual

Setting PTY31 (Emergency Broadcast)
reception
Turn PTY31 (Emergency Broadcast) reception ON/OFF.
1
Press and hold (FUNCTION/SETUP) for at least
2 seconds to activate the SETUP selection mode.
2
Rotate the Double Action encoder to select
"Tuner", and then press
BLUETOOTH General
Audio
3
Rotate the Double Action encoder to select
"PTY31", and then press
4
Rotate the Double Action encoder to select On or
Off, and then press
If you set to On, emergency broadcasts are received
regardless of source. "ALARM" is displayed during
reception.
5
Press and hold for at least 2 seconds to return to
normal mode.
When an emergency broadcast is received, the volume
level will be automatically changed to the memorized level
in the traffic information mode. For details, refer to
"Receiving Traffic Information" on page 10.
• Pressing during the procedure will return to the previous mode.

Setting the Time to automatically Adjust

When you set to ON, the time is automatically adjusted by RDS data.
1
Press and hold (FUNCTION/SETUP) for at least
2 seconds to activate the SETUP selection mode.
2
Rotate the Double Action encoder to select
"Tuner", and then press
BLUETOOTH General
Audio
3
Rotate the Double Action encoder to select "Auto
Clock", and then press
4
Rotate the Double Action encoder to select On or
Off, and then press
5
Press and hold for at least 2 seconds to return to
normal mode.
• Pressing during the procedure will return to the previous mode.
10
-EN
/ENTER.
Display iPod Tuner
/ENTER.
/ENTER.
/ENTER.
Display iPod Tuner
/ENTER.
/ENTER.

Receiving Traffic Information

1
Press and hold BAND/TA for at least 2 seconds so
that the "TA" indicator lights up.
When a traffic information station is tuned in, the "TP"
indicator lights up.
Traffic information is heard only when it is being broadcast.
If traffic information is not being broadcast, the unit is set in
the standby mode. When a traffic information broadcast
begins, the unit automatically receives it and the TRF Info
screen is displayed.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
• If the traffic information broadcast signal falls below a certain level,
the unit remains in the receiving mode for 1 minute. If the signal
remains below a certain level for over 1 minute, the "TA" indicator
blinks.
• If you do not want to listen to the traffic information being received,
lightly press BAND/TA to skip that traffic information message. The
TA mode will remain in the ON position to receive the next traffic
information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.

PTY (Programme Type) Tuning

1
Press (FUNCTION/SETUP) to activate the
Function mode.
2
Rotate the Double Action encoder to select
"PTY", and then press
in Radio (FM receiving) mode.
The PTY Select screen is displayed.
3
Rotate the Double Action encoder to choose the
desired programme type.
4
Press /ENTER after selecting the programme
type to start searching for a station in the selected
programme type.
The chosen programme type display blinks during
searching and lights when a station is found.
If no PTY station is found, "No PTY" will be displayed for 10
seconds.
• You can set the language when PTY is displayed. Refer to "Switching
the Display Language of PTY (PTY Language)" (page 25).
/ENTER, while the unit is