Tips For Defining A Preset That Is Defined As A Privacy Zone; Defining Presets As Privacy Zones - Honeywell HMAX082 Owner's Operation Manual

7.1.5.1 Tips for Defining a Preset that is defined as a Privacy Zone

When defining the preset that is to be a privacy zone, it should be noted that the whole
screen that is currently in view will become blanked when it is turned into a privacy zone.
In Figure 1(a), if the house is to become a Privacy Zone, then you should zoom in until
the house fills the whole screen as shown in Figure 1(b) then define it as a preset. If the
preset is defined as shown in Figure 1(a), then not only would the house be blanked, but
also the area that surrounds the house. Once the privacy zone is defined, you can then
pan, tilt, and zoom safely knowing that the area under our Privacy Zone will not become
visible.
The privacy zone covers a greater area than the object that it covers. This is to make
sure that there is no chance of the area under the Privacy Zone becoming visible. You
can make this "safety region" smaller by zooming into an object more than necessary.

7.1.5.2 Defining Presets as Privacy Zones

Presets 100 to 127 can be defined as privacy zones.
1. From the camera menu, press 5 to access the
privacy zone menu.
2. Select the camera using the number buttons that
correspond to the camera number then press the
camera button.
3. Press aux to change the preset type.
4. Move the joystick up or down to highlight the
desired preset.
Note:
5. Press aux to toggle the preset type between standard and privacy.
If the preset type is set to privacy, the video will be blanked on the monitor whenever
an operator views the area within the defined preset.
6. When finished defining presets as privacy zones, press lock to exit the privacy zones
menu and return to the camera menu.
Rev. 1
The down arrow to the right of the last preset shown means there are more lines
below those displayed. If an operator moves down, an up arrow will be
displayed to the right of the first preset to show there are more lines above those
displayed.
27
PRIVACY ZONES
CAMERA 01:01
PRESET TYPE
100:100 STANDARD
101:101 STANDARD
102:102 STANDARD
103:103 STANDARD
104:104 STANDARD
AUX TO CHANGE
LOCK TO END
900.0560
18-July-2005