Partitioning; Text Brightness; July - Honeywell HMAX082 Owner's Operation Manual

7.2.1 Auto-Sequence, Continued
The position of an entry in the auto-sequence table is indicated by the number under
the column headed "STEP".
2. When finished entering data in the desired fields, position the cursor below the last
step in the sequence and press the aux button to set the end of the sequence.
3. Press the lock button to end programming the auto-sequence. The display returns
to the Monitor Menu.

7.2.2 Partitioning

This feature is not functional at this time.

7.2.3 Text Brightness

From the monitor menu, press the 3 button to
set the brightness for the background and the
characters.
The word BACKGROUND is flashing.
To adjust the brightness of the box
surrounding the characters, move the
joystick left or right until the background is as desired. (If the background scale is set to
its centre position, the background will be clear.)
To adjust the brightness of the characters, move the joystick down until the word
CHARACTERS is flashing. With the word CHARACTERS flashing, move the joystick left
or right until the brightness of the characters is as desired.
To return the brightness of the background and characters to the default settings, press
the aux button.
When finished setting the brightness, press the lock button to return to the monitor
menu.
Note: The background and the character settings cannot be the same. If they are set to
Rev. 1
Note: The down arrow to the right of the last step shown means there are more
lines below those displayed. If an operator moves down, an up arrow will be
displayed to the right of the first step to show there are more lines above those
displayed.
the same brightness, they will be returned to the default settings when the
operator attempts to exit the menu.
BACKGROUND
CHARACTERS
32
TEXT BRIGHTNESS
SETTINGS
AUX TO SET DEFAULTS
LOCK TO EXIT
900.0560

18-July-2005