Safety Instruction - NEC MultiSync V521 User Manual

Safety Instruction

Caution:
When operating the MultiSync V521/V721/V921 with a 220-240V AC
power source in Europe except UK, use the power cord provided with the
monitor.
In UK, a BS approved power cord with moulded plug has a Black (five
Amps) fuse installed for use with this equipment. If a power cord is not
supplied with this equipment please contact your supplier.
When operating the MultiSync V521/V721/V921 with a 220-240V AC
power source in Australia, use the power cord provided with the monitor.
For all other cases, use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety
standard of your particular country.
E S
NERGY TAR
As an E S
NERGY
America Inc. has determined that this product meets the E
guidelines for energy efficiency. The E
represent EPA endorsement of any product or service.
IBM is registered trademark of International Business Machines Corporation
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
E S is a U.S. registered mark.
NERGY TAR
NEC is a registered trademark of NEC Corporation.
All other trademarks or registered trademarks are property of their respective owners.
01b_english
®
Product
Partner, NEC-Mitsubishi Electronics Display of
TAR
English-2
2
S emblem does not
NERGY TAR
01.11.2000, 11:48 Uhr
S
NERGY TAR