Rane SEQ 30L Operator's Manual

OPERATORS MANUAL
25
+
12
9
6
3
0
INPUT 3
0
6
-6 6 9
12
+4 OL
-12 12
LEVEL BYPASS
WEAR PARTS: This product contains no wear parts.
31.5 40 50 63 80 100 125 160 200

QUICK START

If this is your first equalizer, please do yourself and
your speakers a favor and read at least the first five
pages. "An ounce of prevention...," and all that.
The SEQ 30L is a stereo equalizer, so adjusting
any slider affects both channels simultaneously. Begin
by setting all sliders to their center detent (0 dB), and
the INPUT LEVEL to its center detent (0 dB). Try to
make more cuts than boosts. After equalizing, use the
EQ switch to compare equalized and non-equalized
signal. While EQ is switched to Active (BYPASS
button out), adjust the INPUT LEVEL to the same
level as when EQ is switched to BYPASS (in).
You may use either the XLR or ¼" connectors for
Inputs or Outputs. Connect only one INPUT type per
channel. The XLR and ¼" TRS inputs do not sum.
You may, however, use both types of OUTPUTS
simultaneously if desired.
STEREO GRAPHIC EQUALIZER
250 315 400 500 630 800 1k 1.25k 1.6k 2k 2.5k 3.15k 4k 5k 6.3k 8k 10k 12.5k 16k 20k
SEQ 30L
+
12
9
6
3
SEQ 30L
0
STEREO
EQUALIZER
3
6
9
12
POWER
Manual-1