Rane ME 30B Operator's Manual

OPERATORS MANUAL
MASTER CONTROL
4 6
±12
2 8
±6
0 10
OL LEVEL BYPASS RANGE

QUICK START

If this is your first equalizer, please do yourself and your
speakers a favor and read the complete manual. "An ounce of
prevention...," and all that.
You may use either the XLR or ¼" TRS connector for Input
or Output. Hook-up is intuitive. Just follow the silkscreened in-
structions on the rear of the unit. Polarity convention is per IEC/
ANSI/AES standards of pin 2 positive, pin 3 negative and pin 1
shield. The ME 30B does not invert the signal. Only connect one
INPUT type per channel. The XLR and ¼" TRS Inputs do not
WEAR PARTS: This product contains no wear parts.
25 31.5 40 50 63 80 100 125 160 200
+
6
4
2
1
0
1
2
4
6
–
microGRAPHIC EQUALIZER
250 315 400 500 630 800 1k 1.25k 1.6k 2k
sum. You may, however, use both types of OUTPUTS simul-
tanesously if desired.
Anyone familiar with other graphic equalizers finds the ME
30B just as familiar. Setting curves is as easy as it is on all Rane
graphics thanks to our innovative constant-Q circuitry. If you
feel you want more information on setting up your curves, please
read on.
If you are familiar with equalizers, then hook-up, plug-in,
turn-on and go!
ME 30B
2.5k 3.15k 4k 5k 6.3k 8k 10k 12.5k 16k 20k
+
12
8
5
ME 30B
2
0
MICROGRAPHIC
2
EQUALIZER
5
8
12
– POWER
Manual-1