Rane SEQ 30S Operator's Manual

25
INPUT
+
12
0
•
6
-6 6 •
0
•
+4 OL
6
-12 12 •
12
LEVEL BYPASS
25
+
12
9
6
3
0
INPUT
3
0
6
-6 6
9
12
+4 OL
-12 12
LEVEL BYPASS

QUICK START

This manual is for both the SEQ 30s and the SEQ 30L. The only difference is the length of the sliders. The units are electrically
and functionally the same. This manual will refer to "SEQ 30" for either unit.
If this is your first equalizer, please do yourself and your speakers a favor and read at least the first five pages. "An ounce of pre-
vention...," and all that.
The SEQ 30 is a stereo equalizer, so adjusting any slider affects both channels simultaneously. Begin by setting all sliders to their
center detent (0 dB), and the INPUT LEVEL to its center detent (0 dB). Try to make more cuts than boosts. After equalizing, use
the EQ switch to compare equalized and non-equalized signal. While EQ is switched to Active (BYPASS button out), adjust the IN-
PUT LEVEL to the same level as when EQ is switched to BYPASS (in).
You may use either the XLR or ¼" connectors for Inputs or Outputs. Connect only one INPUT type per channel. The XLR and
¼" TRS inputs do not sum. You may, however, use both types of OUTPUTS simultaneously if desired.
WEAR PARTS: This product contains no wear parts.
OPERATORS MANUAL
31.5 40 50 63 80 100 125 160 200
31.5 40 50 63 80 100 125 160 200
STEREO GRAPHIC EQUALIZERS
250 315 400 500 630 800 1k 1.25k 1.6k 2k
250 315 400 500 630 800 1k 1.25k 1.6k 2k
SEQ 30S & 30L
2.5k 3.15k 4k 5k 6.3k 8k 10k 12.5k 16k 20k
2.5k 3.15k 4k 5k 6.3k 8k 10k 12.5k 16k 20k
+
12
•
6
SEQ 30S
•
0
STEREO
•
EQUALIZER
6
•
12
POWER
+
12
9
6
3
SEQ 30L
0
STEREO
EQUALIZER
3
6
9
12
POWER
Manual-1