Download Print this page
Rane SSE 22 Operator's Manual

Rane SSE 22 Operator's Manual

Home cinema equalizer

Advertisement

Quick Links

QUICK START

Great video is easy; great audio is hard, but a SSE 22 makes it a lot easier. Read at least this boxed section and you'll be
on your way toward great audio.
Hook-up is intuitive: In from the controller, out to the amplifiers. Just follow the silkscreened legends near the gold-
plated RCA jacks on the rear of the unit.
Familiarity with other graphic and parametric equalizers makes the SSE 22 just as familiar. If this is your first equalizer,
be gentle; it can overwhelm you.
Use the BYPASS switch as an aid in comparing equalized results with unequalized results. Pushbutton in and locked
(LED on) is the bypassed (unequalized) mode; pushbutton out (LED off) is the normal equalized mode. See the Operating
Instructions on the page Manual-4 for alignment information.
Install the supplied security cover after completing all settings. Be sure the POWER light fits snugly into the hole in the
security cover.
Never connect anything except an approved Rane power supply to the thing that looks like a red telephone jack on
the rear of the unit. This is an AC input and requires special attention if you do not have a power supply exactly like the
one originally packed with your unit. See the full explanation of the power supply requirements on page Manual-3.
THX is a registered trademark of Lucasfilm Ltd.
Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation
OPERATORS MANUAL
HOME CINEMA EQUALIZER
SSE 22
Manual-1

Advertisement

loading

Summary of Contents for Rane SSE 22

  • Page 1: Quick Start

    HOME CINEMA EQUALIZER QUICK START Great video is easy; great audio is hard, but a SSE 22 makes it a lot easier. Read at least this boxed section and you’ll be on your way toward great audio. Hook-up is intuitive: In from the controller, out to the amplifiers. Just follow the silkscreened legends near the gold- plated RCA jacks on the rear of the unit.
  • Page 2: Front Panel Description

    4. Parametric equalizer FREQUENCY control. Slide control used to determine the center Frequency for this filter section. The range is 1 kHz-10 kHz. 5. POWER indicator. This LED lights any time power is supplied from the Rane model RS 1 power supply (included). To avoid confusion a distinction is made here between electrical and political.
  • Page 3: Rear Panel Description

    The power requirements of the unit call for an 18 volt AC center-tapped transformer only. This is not a telephone jack. Never use a power supply other than the one supplied, or a replacement approved by Rane Corpo- ration.
  • Page 4: Inputs And Outputs

    34.5 dB above reference, making it virtually unclippable. With all LEVEL controls located in their 0 dB detented positions, the SSE 22 operates with unity gain from Input to Output. No additional gain settings are necessary. Use the SSE 22 only for specific equalization, not level control.
  • Page 5: Operating Instructions

    Input. Connect the SSE 22 Outputs to an amplifier and the instructions with the analyzer. Though more time consum- surrounds. With the SSE 22 set flat (0 dB), adjust volume to a ing, a test CD and a sound pressure level meter can work. For comfortable level on the processor and leave it set.
  • Page 6 (11 cm x 52 cm x 35 cm) ..Weight 8 lb (3.6 kg) Note: 0 dBr=150 mVrms=Home THX Equalizer Reference Level ©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL (425)355-6000 FAX (425)347-7757 WEB http://www.rane.com All features & specifications subject to change without notice. AUG97 Manual-6...