111-1292 A
20/4/07
1:51 pm
Always select the maximum height of cut setting to prevent the engine
overloading. Be prepared to make two cuts when the grass is long.
To prevent damage to your lawn do not remove more than one third of
grass height in one cut.
Hayter balanced 'C' type cranked cutterblades are fitted to this
machine. They are designed to swing on the shoulder of the
Cutterblade bolt when encountering a fixed object. Keep cutterblades
sharp and ensure they are secured correctly.
When moving the mower across non-grassed areas, stop the engine
and set the mower to the maximum height of cut to protect the cutting
mechanism.
Page 1.17
OPERATING
Heavy Growth
Cutterblade Operation
Non-Grassed Areas
THE MOWER
CS28
305113
CS126
STOP
1.17