WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG CLEANER BEFORE
CHANGING BELT OR BRUSHROLL.
TO REMOVE BELT
Lay cleaner flat and flip
Lift nozzle guard off.
Lift and remove brushroll.
cleaner to expose nozzle
Dispose of old belt.
base. Base should lay flat
and face up. To remove noz-
zle guard, use Phillips screw-
driver to remove the five (5)
screws. Arrows show loca-
tion of screws.
TO REPLACE BELT OR BRUSHROLL
Place new belt in area of
Slide belt onto motorshaft.
Rotate brushroll manuallv to make sure belt
brushroll without bristles.
is properly aligned.
I
I '
I
Reattach nozzle guard.
Replace all five (5) screws to
secure nozzle guard.