Kenmore Double Oven Gas Range Use & Care Manual page 25

Setting Oven Controls
Setting Convection Convert feature- Lower Oven Only
The CONV CONVERT
properly, this feature is designed to display the oven set converted (reduced) temperature in the display.
Convection Convert MUST be used with the Convection Bake keypad. Cook Time or Delay Start function may be added.
Using Convection Convert (Bake) feature to automatically
adjust oven temperature (example: setting oven for 350°F):
1. Arrange interior oven racks and place food in oven.
2. Press .
(Fig. 1). If a Cook Time or a Delayed Start (Delayed
3. Press
Timed Bake) is desired, enter the times now.
4. Press . "CONV BAKE" and the oven temperature adjustment
will appear briefly in the display (for this example it is 325°F). A
beep will sound once the adjusted oven temperature is reached
(Fig. 2).
Note: When used with a Cook Time or a Delay Start setting, the
Convection Convert feature will display a "CF" for check food when
the bake time is 75% complete (Fig. 3). At this time the oven control
will sound 3 long beeps at regular intervals until baking has finished.
When the bake time has completely finished the control will display
"End" (Fig. 4) and will sound 3 long beeps every 30 seconds until the
pad is pressed.
The oven icon will show a rotating fan within the square. This rotating
fan icon indicates when the Convection Fan is operating.
Press to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection Convert
feature with a Cook Time or Delay Start function is 20 minutes.
pad is used to automatically convert a standard Baking recipe for convection baking. When set
INSTRUCTIONS PRESS
25
DISPLAy
Fig. 1
Fig. 2
Fig. 3
Fig. 4