Samsung SVR-3200 User Manual page 76

User Manual
Language
The OSD menu supports multiple languages. Select a language.
Key Buzzer
This determines whether to use the buzzer for the buttons on the front.
Default
This restores the factory default settings. Press the [Default] button to restore the factory default.
Load Configuration
This sends the DVR setting stored in a USB storage device to the DVR.
Save Configuration
This saves the DVR setting to a USB storage device.
Firmware Update
Save the Update Firmware for USB to USB storage and connect it to the DVR.
Select Firmware Update from System Setup and press the [Enter] button.
When a message prompting you to update appears, select [Yes] and press the [Enter] button.
After a while, a buzzer beeps and the unit reboots.
The Update Firmware for USB is provided in a "*.dat" file.
To do a firmware update through the network, run the updater executable file and click a DVR
on the DVR list. When the IP, MAC address and port of the DVR are displayed, enter the
password (default: 11111111) specified in SNM-128S into "Admin Password" and press the [Start
Upgrade] button.
After the upgrade progress window appears, a message prompting you to reboot the unit is
displayed. Select "Yes" to reboot the unit.
DVR Alias
This sets a DVR alias.
System Log
The system logs various events including changing menu settings, turning the power on or off,
changing the time zone, turning HDD on or off, using the Copy function, and when system
events occur.
75