System Setup - Samsung SVR-3200 User Manual

is not controlled for a long time. When this is set to On, PTZ returns to Home if PTZ is
not controlled for a specified period of time.
PTZ Idle Time
This is used to set when PTZ returns to Home if PTZ is not controlled.
If this is set to 5 seconds, PTZ returns to Home when PTZ is not controlled for more
than 5 seconds.
PTZ Port
This is set if a connected camera supports PTZ (Pan/Tilt/Zoom).
Press the [Enter] button and use the left or right arrow key or the mouse wheel to set
the PTZ port connected to the channel.
Camera ID
This is set if a connected camera supports PTZ (Pan/Tilt/Zoom).
Press the [Enter] button and use the up or down arrow key or the mouse wheel to set
the base address of the PTZ device.
For more information on cameras supporting PTZ and how to set them up, refer
to "7.4.9 PTZ Use".

6.9 System Setup

6.9.1 System Setup
74
User Manual