menu.
4.4.1 Default System Mode
Use the
button to automatically convert the set channels.
-
Press the [MENU] button to set the dwell time. Alternately, click the
-
Function menu.
Go to "Display Setup" on the OSD menu.
-
Go to the "Monitor" submenu under "Display Setup" and press the [Enter] button or left-
-
click.
Select "Dwell Time" and set a value between 1 and 60 seconds. When this is set to Off,
-
auto sequencing will not work.
Auto sequencing mode can be enabled by pressing the [AUTO] button in all split modes.
-
To exit auto sequencing mode, press the [AUTO] button once again.
-
4.4.2 Auto Sequencing Mode
Press the [AUTO] button. Alternately, click the
-
Set Sequencing from "Monitor" in the OSD menu.
-
button on the Function menu.
26
User Manual
button on the