Selecting The Paper - Sharp MX-M350U Operation Manual

SELECTING THE PAPER

This section explains how to configure the "Paper Selection" setting on the [Paper] tab of
the printer driver properties window.
When the machine is connected to a network, the paper size setting, paper type setting,
and amount of paper remaining in the tray can be viewed. Before printing, click the [Tray
Status] button to check the latest tray information.
• When [Auto Select] is selected...
The tray that contains the size of paper set in "Paper Size" is automatically used for printing.
• When [Paper Source] is selected...
Printing will take place using the selected tray regardless of the "Paper Size" setting.
• When [Paper Type] is selected...
Printing will take place using the paper tray that contains the specified paper type and the size of paper set in "Paper
Size".
NOTES
• Special media can also be placed in the bypass tray. For the procedure for loading paper and other media in the bypass tray, see
"Loading paper in the bypass tray" in the operation manual (for general information and copier operation).
• The paper size and paper type settings for each tray and whether or not the paper loaded in each tray can be used for printing
are specified in the "Paper tray settings" in the system settings of the machine. For more information, see the operation manual
(for general information and copier operation).
• To select the [Paper Source] or [Paper Type] when printing, the tray settings must be configured on the [Configuration] tab of the
printer properties window.
1-4
BASIC PRINTING PROCEDURE