Connecting The Ethernet Port Via A Network Hub (Straight-Through Cable); Figure 6: Local Area Connection Properties Window; Figure 7: Internet Protocol (Tcp/Ip) Properties Window - Kramer RC-80 User Manual

3. Right-click Local Area Connection Properties.
4. Select Properties.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see
Figure 6).

Figure 6: Local Area Connection Properties Window

6. Select Use the following IP address, and fill in the details as shown in
Figure 7.
7. Click OK.

Figure 7: Internet Protocol (TCP/IP) Properties Window

6.2.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through
Cable)
You can connect the Ethernet port of the RC-160 to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.
14
Connecting the Remote Control Machine
KRAMER: SIMPLE CREATIVE TECHNOLOGY