HP xw9400 Quickspecs page 31

QuickSpecs
Technical Specifications - Graphics
NVIDIA Quadro NVS 450
512 MB PCIe Graphics Card
NVIDIA Quadro FX 580
512MB Graphics Card
Form Factor
Bus Type
Memory
Connectors
Maximum Resolution
Supported Graphics APIs OpenGL 3.0
Available Graphics
Drivers
Power consumption
Form Factor
Graphics Controller
Bus Type
Memory
Connectors
Maximum Resolution
RAMDAC
Shading architecture
DA - 12594 Worldwide — Version 36 — September 1, 2010
ATX Full Height, 1/2 length
Passive cooling
PCI Express x16, Generation 2.0
512 MB GDDR3 (256MB per GPU)
Four DisplayPort;
Four DisplayPort to DVI-D adapters included.
('DisplayPort to VGA' and 'DisplayPort to Dual Link DVI' adapters available as
an accessory)
DisplayPort connectors support ultra-high-resolution panels (up to 2560 x
1600)
NOTE: This card supports up to four displays
Direct X 10.0
Genuine Microsoft Windows Vista(64-bit and 32-bit), Microsoft Windows XP
Professional(64-bit and 32-bit)
Red Hat Enterprise Linux(RHEL) WS4 & 5 Desktop/Workstation
HP qualified drivers may be preloaded or available from the HP support web
site: http://welcome.hp.com/country/us/eng/software_drivers.html.
Novell SUSE Linux Enterprise drivers may be obtained from:
ftp://download.nvidia.com/novell or http://www.nvidia.com
35 Watts
4.376 inches (H) × 6.60 inches (L)
NVIDIA Quadro FX 580 Graphics Board
PCI Express x16, Generation 2.0
512MB GDDR3 SDRAM unified graphics memory
2 DisplayPort, 1 Dual-Link DVI-I.
One DisplayPort to DVI adapter included
('DVI to VGA', 'DisplayPort to VGA' and 'DisplayPort to Dual Link DVI' adapters
available as an accessory)
Two DisplayPort outputs drive two digital displays up to 2560 x 1600
One dual-link DVI-I output drives one digital display at resolutions up to
2560 x 1600 @ 60Hz or one analog display at resolutions up to 2048 x
1536 @ 85Hz
NOTE: This card supports up to two displays
Single Internal 400 MHz DAC
Full Shader Model 4.0 (OpenGL 2.1/DirectX 10 class)
Long fragment programs (unlimited instructions)
Long vertex programs (unlimited instructions)
Looping and subroutines (up to 256 loops per vertex program)
Dynamic flow control
Conditional execution
HP xw9400 Workstation
Page 31