HP iPAQ hx2490 Quickspecs page 4

QuickSpecs
Standard Features
Cradle Interfaces
Other interfaces
SD Slot
CF Slot
Power Supply
AC Adapter
Connector
DC Power jack connector
for AC/DC Adapter
connection
IrDA (SIR)
USB 2.0 Client – supported via HP standard 22-pin cradle interface
Serial RS232 – supported via HP standard 22-pin cable interface (cable must be purchased separately)
NOTE: Some HP authorized options may not be supported. See http://www.hp.com/go/ipaqaccessories.
Support 1-bit SDIO and 4-bit SD/Multimedia Card type memory standard
1 Type II
Battery
AC Power
NOTE: Battery run time varies based on the usage pattern of an individual user and the configuration of
the handheld. Use of internal wireless capabilities and backlight will significantly decrease battery run
time.
Dimensions (H x W xD)
Cord Length (approx.)
Power Supply Ratings
DA - 12293 North America — Version 8 — September 26, 2007
1 – 22 pin
1
Removable/rechargeable 1440 mAh Lithium-lon (user changeable).
Optional extended 2880 mAh Lithium-lon battery available for purchase
separately (http://www.hp.com/go/ipaqaccessories).
AC Input: 100~240 Vac, 50/60 Hz, AC Input current: 0.3 Aac max
Output Voltage: 5Vdc (typical), Output Current: 2A (typical)
3 x 1.9 x 1.8 in (76 x 48 x 44 mm – including prongs), (may vary by model)
6 ft (1.83 m)
Voltage Range
Input Current
Input Frequency
Output Voltage
Output Current
HP iPAQ hx2490 Pocket PC
100 to 240 V Switching
0.3 Aac
50 to 60 Hz
5 VDC
2 Amp
Page 4