Table of Contents
Advertisement
7.3.1.3 Per Port Configuration
1. PortState: Displays the spanning tree status for each port – whether the port is forwarding or
blocking.
2. Select <Edit>.
3
. PathCost: Specifies the path cost of the port that the switch uses to determine which ports
are the forwarding ports.
4. Priority: This specifies the priority of port; you can make it more or less likely to become the
root port.
5. Press Ctrl +A to go back to the action menu.
6. Select <Save> to save all configured values.
7. On the action menu line you can press <Next Page> to configure ports 9-26; press <Previous
Page> to return to the last page.
NOTE: For parameter descriptions, please see Section 2-4-8.
99
Advertisement
Table of Contents
