Table of Contents
Advertisement
Port Selection
Controlling all the PCs connected to your CS164/CS168 from a single console couldn't
be easier. You can access any PC on the chain using two methods: Manual or HotKey.
Manual
Simply press the appropriate "Select" button located on the front of the CS164/CS168
to switch between computers. The GREEN LED lights indicate the port that is
currently in use. The RED LED lights indicate the computers that are turned on and
have power.
HotKey Navigation
HotKey navigation allows you to conveniently access connected PCs directly from the
keyboard, instead of having to manually select by pressing the "Select" button on the
CS164/CS168 switch. To select a port with the HotKey method, do the following:
1. Press and release the [Scroll Lock] key twice within 2 seconds and press:
(a) "Up-Arrow" to select the previous channel,
(b) "Down Arrow" to select the next channel
(c) [S] key to set the KVM switch into Auto Scan Mode.
- 9 -
Advertisement
Table of Contents
