15.11 Factory reset
Reset all channel data to the device factory settings. All stored channels, lists and
settings will be deleted.
NOTE: It is recommended to make a factory reset after you updated your set via
network or USB. Before you make a factory reset, export all data to the USB memory
with the export data function (chapter 5.4) and import them again after the factory
reset. In case the data cannot be imported, setup your set again.
16. SETTINGS
16.1 Network connection
During booting your device will connect automatically to the network.
Auto
Manual
IP
Subnet mask
Gateway
DNS Server
Press MENU key to connect.
Modem
Phone number
Press MENU key to connect.
16.2 ARIVA share
Stream movies, MP3s, photos (only supported formats) from your PC Shared
Documents Folder to the device in your local network.
Enter
ARIVA share
Windows
PC IP address
PC Folder name
Press MENU key to connect.
In case a connection cannot be established check your PC settings.
Enter the shared documents folder settings and activate the option: share this folder
in the network.
Enter the LAN (Local area network) settings and activate the option: File and Printer
Sharing for Microsoft Networks.
Check the shared documents folder names (XP-Shared/SharedDocs, Vista-Public,
Windows 7-Users). If the folder name is different, create a new shared folder
To connect automatically by DHCP.
To connect manually with a static IP address.
Enter the fixed IP address.
Enter the subnet mask address. In general it is 255.255.255.0.
Enter the router's IP address.
Enter the DNS Server's IP address. In general it is the router's IP
address. You can enter 2 DNS Server IP addresses.
To connect with your telephone line.
Enter the phone number to dial in.
(Settings menu) to connect.
Select the PC Windows system (XP/Vista/Windows7).
Enter
the
IP
address
Username/Password.
Select the name of the Shared documents folder.
XP: Shared/SharedDocs.
Vista: Public.
Windows 7: Users.
of
your
PC.
If
required
enter
a
30
Need help?
Do you have a question about the ARIVA @Link 200 and is the answer not in the manual?
Questions and answers