Top Cover - HP Mini 210 Maintenance And Service Manual

Top cover

NOTE: The top cover includes the TouchPad board and bracket.
Description
Charcoal, for HP Mini 210 models
Crimson Red, for HP Mini 210 models
Glossy Black, for HP Mini 110 models
Glossy Black, for Compaq Mini CQ10 models
Luminous Rose, for HP Mini 210 models
Ocean Drive, for HP Mini 210 models
Pacific Blue, for HP Mini 110 models
Sonoma Red, for HP Mini 110 models
Sweet Purple, for HP Mini 210 models
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the keyboard (see
Remove the top cover:
1. Position the computer right-side up, with the front toward you.
2. Release the ZIF connector for the power button cable, and then disconnect the cable (1).
3. Release the ZIF connector for the speaker cable, and then disconnect the speaker cable (2).
56 Chapter 4 Removal and replacement procedures
Battery on page 44).
Service door on page
Keyboard on page 53).
45).
Spare part number
650747-001
650752-001
658512-001
663677-001
650751-001
650748-001
658515-001
658513-001
654204-001