Zoom Multistomp MS-70CDR Operation Manual page 5

Parameter knobs
From the left
Parameter knob 1 [
Turn left and right to adjust the parameter.
Press to open the MENU where you can remove and
rearrange effects and make various settings (→P12, 18).
You can also check the firmware version (→P22).
Parameter knob 2 [
Turn left and right to adjust the parameter.
Press to open the MEMORY screen where you can
select and save patch memories, and change patch
memories using the footswitch (→P10, 11).
Parameter knob 3 [
Turn left and right to adjust the parameter.
Press to change the parameter page (→P9).
]
]
]
Cursor keys
Up and down cursor keys [
Press to change the effect type.
Press and hold for 1 second to select the effect category
(→P8).
Left and right cursor keys [
Press to show the effect to the left or right.
Press and hold for 1 second to add a new effect left or
right of the current effect (→P12).
/ ]
/ ]
5
Part Names