Upgrade; Device Information - Hawking HNC800PTZ User Manual

2.3 Upgrade

When you select one device or multiple devices (of the same model), the "Upgrade" button will be enabled. Click on it to
u pgrade the firmware of the selected device(s). After clicking on the "Upgrade" button, the IP Setup Wizard will try to
c onnect to the s elected device(s). If the authentication fails, it will prompt a pop-up dialog
a nd HTTP port number. (See Figure 2-10 below.)
2

.3.1 Device Information

A fter connecting to the selected device(s), the display will appear as shown in Figure 2-13 on the following page. If you
s elect more than one device, the "Device Info" tab will show all the selected devices. (See Figure 2-11 below.) You can
s witch to a specific camera's info (see Figure 2-12) by pressing the Tab key or double clicking on the device list.
Figure 2-10. Authentication
Figure 2-11. Device Info
to ask for the correct password
17