Action Buttons - Hawking HNC800PTZ User Manual

The IP Setup Wizard allows you to set up or upgrade multiple devices (of the same model) at the same time. If you select
different models, the buttons will be disabled. (In this case, the model number is HNC800PTZ.) There are five buttons on
the bottom of the main page (see Figure 2-3 below), and five buttons on the left panel of the main page (see Figure 2-4).
2

.1.1 Action Buttons

Clicking on this button will clear the device list and cause the IP Setup Wizard to search for available
network cameras on the LAN again. This will take about 5 seconds.
To set up or update devices that are not on the same subnet to the LAN using the IP Setup Wizard,
you can click on this button to add them manually. Clicking on this button will prompt a pop-up
dialog as shown in Figure 2-5. You can input the desired IP address and click on "Ok" to add the
network camera to the device list.
Figure 2-3. Action buttons
Figure 2-4. Function buttons
Figure 2-5. "Add a device" dialog
11