Hawking HNC800PTZ User Manual page 10

After the IP Setup Wizard has finished searching, the interface shown in Figure 2-2 will appear. You can select any device in
the list by clicking on the checkbox to the left of the device. (For a de tailed explanation of how the IP Setup Wizard
automatically assigns a device an IP address that is consistent with your local area network [LAN] settings, please review the
Quick Installation Guide that is included in your network camera's packaging.) The three buttons "Setup", "Upgrade", and
"Reset to default" will not be enabled until you have selected at least one of the devices that appears in the list.
Figure 2-2. IP Setup Wizard user interface
10