Network Settings - Hawking HNC800PTZ User Manual

2.2.1.3 Adjust date and time
There are three ways to adjust the system date and time. The easiest way is to make the Network Camera "Synchronize
with computer time". The second way, "Manual", allows you to set the date and time manually by entering new values.
Be sure to n otice the format in the related fields while t
"Automatic", allows you to make the network camera automatically synchronize with time-servers over the Internet
every hour.

2.2.2 Network Settings

C licking "Next" in the main System Settings window (Figure 2-7) will take you to the Network Settings wi
w indow, you can change the network camera's IP address, subnet mask, default gateway/router, primary DNS, and
s econdary DNS. (See Figure 2-8 below.)
2 .2.2.1 Fix the IP address
C hecking the "Reset IP address at next boot" box will force the network camera to reconfigure its IP address whenever
it reboots. The preferred method, though, is to use a fixed IP address. If you want the camera to use a fixed IP address,
p lease uncheck the "Reset IP address at next boot" and assign the camera an available IP address that is consistent with
y our existing network settings. If you selected more than one device, you will not be able to change the IP address and
th e IP address field will be disabled.
2 .2.2.2 Basic Network Settings
Y ou can setup the network setting by this page. Usually this is no need to be changed, if you do change it please make
sure you input the correct setting or the device
yping, so that you input the values correctly. The third way,
Figure 2-8. Network Settings
may not be reachable.
ndow. In this
15