Initial Settings; Adjusting Initial Settings; Setting The Time; Setting The Fm Tuning Step - Pioneer KEH-P4025 Operation Manual

Initial Settings

Adjusting initial settings

Initial settings lets you perform initial set up of
different settings for this unit.
1 Press and hold until the unit turns
SOURCE
off.
2 Press and hold until
AUDIO
in the display.
Press repeatedly to switch between the
AUDIO
following settings:
— —
TIME FM STEP AM STEP
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
• You can also cancel initial settings by holding
down until the unit turns off.
AUDIO
appears
TIME
—
AUX
.
BAND

Setting the time

This is used to set the time on the unit's clock
display.
1 Press to select the time.
AUDIO
Press until the time appears in the dis-
AUDIO
play.
2 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
display:
—
HOUR MINUTE
As you select portions of the clock display the
portion selected will blink.
3 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.

Setting the FM tuning step

The tuning step employed by Seek Tuning in the
FM mode can be switched between 100 kHz
(preset at the factory) and 50 kHz.
1 Press to select
AUDIO
Press repeatedly until
AUDIO
the display.
2 Select the FM tuning step with 2/3.
.
FM STEP
appears in
FM 100
En
16