Playing Tracks In A Random Order; Scanning Cds And Tracks; Pausing Cd Playback - Pioneer KEH-P4025 Operation Manual

Multi-CD Player

Playing tracks in a random order

Random play lets you play back tracks in a ran-
dom order within the repeat range, multi-CD
player repeat and disc repeat.
1 Select the repeat range.
Refer to Repeating play on page 11.
2 Press and hold
REPEAT/RANDOM
two seconds to turn random play on.
(random playing in a disc) or
DRDM
dom playing in a magazine) appears in the dis-
play. Tracks will play in a random order within
the previously selected multi-CD player repeat
or disc repeat ranges.
3 Press and hold
REPEAT/RANDOM
two seconds to turn random play off.
Tracks will continue to play in order.

Scanning CDs and tracks

While you are using
DISC
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
multi-CD player repeat, the beginning of the first
track of each disc is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on page 11.
2 Press and hold
PAUSE/SCAN
seconds to turn scan play on.
(scanning tracks) or
DSCN
discs) appears in the display. The first 10 sec-
onds of each track of the present disc (or the
first track of each disc) is played.
for about
(ran-
RDM
for about
(disc repeat), the
for about two
(scanning
SCAN
3 When you find the desired track (or disc)
press and hold
PAUSE/SCAN
seconds to turn scan play off.
The track (or disc) will continue to play.
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
1 Press
PAUSE/SCAN
appears in the display. Play of the cur-
PAUSE
rent track pauses.
2 Press
PAUSE/SCAN
Play will resume at the same point that you
turned pause on.
for about two
to turn pause on.
to turn pause off.
En
12