Manual Tuning
■
Digital TV
Normally use
Auto Tuning
channels.
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function.
All Digital channels found will be added to
●
1. Select physical channel with
2. Press
OK
to search
■
Analogue TV
Set Analogue TV channel manually after
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with
/
4. Select
Store
with
If a VCR is connected only with the RF cable, select channel position 0.
●
Update Channel List
By updating the Digital TV channel list, you can add new channels, delete
removed channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel
List,
Child
Depending on the signal condition, the update may not work properly.
●
New Channel Message
Selects whether to give a notification message when a new Digital TV
channel is found.
When a notification message appears, you can perform
●
List
pressing OK.
Sometimes, mainly during summer months at night, the TV may pick up
●
distant TV stations outside your broadcast due to favourable short term
or
Update Channel List
/
and select offset with
Auto
/
and press
OK
to set
Lock, etc.
- 38 -
to retune Digital TV
Channel
List.
/
Tuning.
Favourites
Update Channel
Edit,