press
OK
to access
2. Select
USB HDD Rec.
To check / change / cancel a timer programming event
●
Recording
LED will turn to orange in Standby mode if
●
To return to TV Guide
●
RETURN
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
record from the time you finish the timer programming event setting.
= Note =
Not valid in Analogue TV
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
No other channels can be selected while the recording of
●
Programming
is in progress.
When recording programmes to the USB HDD, be sure to format the USB
●
HDD and enable it to record in
Recording
Tuning and editing channels
Setting menu
You can retune channels, create your favourite channel lists, skip unwanted
channels, etc.
1. Select Digital TV or Analogue TV with
2. Display the menu with
3. Select
Setup
Tuning Menu
Digital TV Tuning Menu
The menu name varies depending on the TV mode.
●
4. Select one of the functions with
Favourites Edit
/
Channel List
/
New Channel Message
/
Reminder
with
Timer Programming
with
/
and press
only works reliably if correct time information is
USB Device
USB HDD setup
MENU
with
/
Analogue TV Tuning Menu
/
Channel List
/
Auto Tuning
- 34 -
/
and press
OK
Editing timer programming
Timer Programming
OK
to set
USB HDD Rec.
Setup.
TV
/
and press
OK
to access
and press
OK
to access
/
Manual Tuning
/
Signal Condition
to set
is set.
to
Timer
/
Update