Table of Contents
Advertisement
When the remaining time is less than 3 minutes, the remaining time will
●
flash on the screen.
You can also set the time from
●
Settings
Last view
Switch to a previously viewed channel or input mode easily with
Press again to return to the current view.
●
= Note =
Switching channel is not available while the recording of
●
Programming
or
Watching less than 10 seconds is not reflected in the previously viewed
●
channel or input mode.
Adjusting time
■
Adjust the standard time
Select the region where you live to adjust the standard time. (Base on GMT)
1. Display the menu with
2. Select
Timer
Clock Settings
to access
3. Select the region with
NSW / ACT
/
Victoria
Northern Territory
The time contained in the broadcast signal is UTC (Universal Time
●
coordinated) formally known as GMT (Greenwich Mean Time).
NSW / ACT
/
Victoria
South Australia
Western
Australia: +8:00
■
Adjust for Summer Time
Select time offset from the standard time for Summer Time. (Base on GMT)
1. Display the menu with
2. Select
Timer
Clock Settings
press
OK
to access
3. Select
Auto
/
Off
If there is a gap between displayed time and actual time, set this function.
●
Off Timer
Timer
Off Timer
One Touch Recording
MENU
Region Select
/
and press
/
Queensland
/
/
Tasmania
/
Queensland
/
Northern
Territory: +9:30
MENU
Daylight Saving Time
/
+ 1/2 hour
/
+ 1 hour
- 19 -
in the Timer Menu.
Timer
is in progress.
with
/
OK
to set
South Australia
/
Western Australia
/ Tasmania: +10:00
with
with
/
and press
LAST
VIEW.
and press
OK
/
/
and
OK
to set
Advertisement
Table of Contents
