Manual Tuning
Normally use
Auto Setup
●
If tuning has not been done completely or for adjusting the direction of the
●
aerial or dish, use this function. (DVB)
All DVB channels found are added to
●
■
DVB (UK only)
1. Select Frequency.
2. Press
OK
to search.
All channels found are added to
●
■
DVB (Ireland only)
1. Select a channel and adjust frequency for each channel.
Set where the level of
●
2. Press
OK
to search.
■
Analogue
Set Analogue channel manually after
1. Select the channel position with
2. Select the channel with
3. Set
Manual
Tuning.
4. Select
Store
and press
Use
Fine Tuning
●
programme (affected by weather conditions, etc.).
– Ireland only
If a VCR is connected only with the RF cable, select channel position 0.
●
or
Update Channel List
Channel
Signal Quality
Auto
Numeric
Channel Up /
OK
to set.
to make small adjustments to the tuning of an individual
- 130 -
to retune DVB channels.
Channel List
Editor.
List.
becomes the maximum.
Setup.
buttons.
Down.