Set the equipment to WPS (Push button) mode. For details, read the
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
If the connection has failed, check the settings and positions of the
●
equipment. And then, follow the on-screen instructions.
■
Change settings
You can set up
Network
Channel setting method
Follow the on-screen instructions and set manually.
Set
Reset settings
●
= Note =
You cannot connect the internet service while the TV is set to
●
Access
Point.
You can connect up to 7 devices. But the transfer rate will vary according
●
to communication environment or the numbers of connected equipment.
To confirm the current network settings
●
Home network
Ensure the equipment to connect supports WPS for this setup.
●
WPS: Wi-Fi Protected Setup™
●
Network Status
Displays and checks the network status (MAC Address, current network
settings, etc.).
1. Display the menu with
2. Select
Network
3. Automatically testing is done and the
Try
Again:
Performs automatic testing of the network connection for the TV and
displays the current status again.
Status
Details:
Displays the detailed network status (SSID, security type, encryption
type, etc.).
For more information of the network connection, select Help.
●
name(SSID),
Encryption
manually.
to reset the items of
Network settings
MENU
Network Status
with
Network Status
- 70 -
key,
Wireless type
Change
settings.
Network Status
/
and press
OK
screen is displayed
and
Wireless
to access