Restriction Of The Use Of Hazardous Substances (Rohs) - Multitech MultiModem MTCBA‐H3‐U1 User Manual

Appendix C – Environmental Information
Multi‐Tech Systems, Inc. also declares it has been duly diligent in ensuring that the products supplied are
compliant through a formalized process which includes collection and validation of materials declarations and
selective materials analysis where appropriate. This data is controlled as a part of a formal quality system and
will be made available upon request.
Restriction of the Use of Hazardous Substances (RoHS)
Multi‐Tech Systems, Inc.
Certificate of Compliance
2002/95/EC
Multi‐Tech Systems, Inc. confirms that this product now complies with the chemical concentration limitations
set forth in the directive 2002/95/EC of the European Parliament (Restriction Of the use of certain Hazardous
Substances in electrical and electronic equipment ‐ RoHS)
These Multi‐Tech Systems, Inc. products do not contain the following banned chemicals:
Lead, [Pb] < 1000 PPM
Mercury, [Hg] < 1000 PPM
Hexavalent Chromium, [Cr+6] < 1000 PPM
Cadmium, [Cd] < 100 PPM
Polybrominated Biphenyl, [PBB] < 1000 PPM
Polybrominated Diphenyl Ether, [PBDE] < 1000 PPM
Moisture Sensitivity Level (MSL) =1
Maximum Soldering temperature = 260C (wave only)
Notes:
Lead usage in some components is exempted by the following RoHS annex; therefore, higher lead
1.
concentration could be found.
a. Lead in high melting temperature type solders (that is, tin‐lead solder alloys containing more than 85%
lead).
b. Lead in electronic ceramic parts (for example, piezoelectronic devices).
Moisture Sensitivity Level (MSL) – Analysis is based on the components/material used on the board.
2.
24 Multi‐Tech Systems, Inc. MultiModem Cell User Guide