Document 2130681. Rev 1.0 Aug.06
Table 6-1: Connection Status Area icons (continued)
Icon
A high-speed (1X) packet data call is in progress.
A circuit switched data call is in progress.
A high-speed (1X or 1xEV-DO) packet data connection is dormant; the
radio channel has been released allowing you to make and receive
voice calls. You can resume data transmission without the need of re-
establishing the connection.
Some applications may not be able to function on a
connection.
A fatal error has occurred and the AirCard PC Card is inoperable.
1.
Close Watcher.
2.
Safely eject and remove your AirCard PC Card.
3.
Re‐insert your AirCard PC Card.
4.
Restart Watcher.
5.
If this icon is still displayed, restart your computer.
Call Status Area
The Call Status Area displays messages related to the status or
progress of a connection.
Where a duration timer is shown, timing begins when the call
is initiated—not from the time the call is fully connected. This
is a measure of the time the AirCard PC Card has been using
the radio channel (a wireless network resource).
Click this display to exit PowerSave mode
"
AirCard PC Card could not find a system within a 15 minute
interval. To conserve power, the AirCard PC Card reduces
channel scanning to once every three minutes. To force the
AirCard PC Card out of PowerSave mode, click in the Call
Status Area. The AirCard PC Card performs a channel scan
and, if no network is detected, returns to PowerSave mode.
Watcher Basics
Meaning
dormant
" indicates that the
26